H3C基於源地址策略路由實例

H3C基於源地址策略路由怎麼配置，為幫助大家學習H3C路由，yjbys小編為大家分享H3C基於源地址策略路由配置實例，快來學習吧!

system-view

System View: return to User View with Ctrl+Z.

[H3C]acl

[H3C]acl nu

[H3C]acl number 2000

[H3C-acl-basic-2000]rule permit source

[H3C-acl-basic-2000]qu

[H3C]route-policy aaa permit node 0

%You are modifying this sequence

[H3C-route-policy]if-match acl 2000

[H3C-route-policy]apply IP-address next-hop

[H3C-route-policy]qu

[H3C]int e1/0

[H3C-Ethernet1/0]ip policy route-policy aaa

[H3C-Ethernet1/0]qu

[H3C]save

[Master-GigabitEthernet1/0/33]qos apply policy ceshi inbound

5500系列

重定向至下一跳典型配置指導

# 定義基本ACL 2000，對源IP地址為的報文進行分類。

system-view

[Switch] acl number 2000

[Switch-acl-basic-2000] rule permit source 0

[Switch-acl-basic-2000] quit

# 定義基本ACL 2001，對源IP地址為的.報文進行分類。

[Switch] acl number 2001

[Switch-acl-basic-2001] rule permit source 0

[Switch-acl-basic-2001] quit

# 定義類classifier_1，匹配基本ACL 2000。

[Switch] traffic classifier classifier_1

[Switch-classifier-classifier_1] if-match acl 2000

[Switch-classifier-classifier_1] quit

# 定義流行為behavior_1，動作為重定向至。

[Switch] traffic behavior behavior_1

[Switch-behavior-behavior_1] redirect next-hop

[Switch-behavior-behavior_1] quit

# 定義類classifier_2，匹配基本ACL 2001。

[Switch] traffic classifier classifier_2

[Switch-classifier-classifier_2] if-match acl 2001

[Switch-classifier-classifier_2] quit

# 定義流行為behavior_2，動作為重定向至。

[Switch] traffic behavior behavior_2

[Switch-behavior-behavior_2] redirect next-hop

[Switch-behavior-behavior_2] quit

# 定義策略policy，為類classifier_1指定流行為behavior_1，為類classifier_2指定流行為behavior_2。

[Switch] qos policy policy

[Switch-qospolicy-policy] classifier classifier_1 behavior behavior_1

[Switch-qospolicy-policy] classifier classifier_2 behavior behavior_2

[Switch-qospolicy-policy] quit

# 將策略policy應用到端口GigabitEthernet 1/0/1的入方向上。

[Switch] interface GigabitEthernet 1/0/1

[Switch-GigabitEthernet1/0/1] qos apply policy policy inbound