h3c路由器端口映射方法
你知道華為路由器怎麼設置嗎?路由器的端口映射的方法有哪些?本文介紹了華為3com路由器的端口映射的.方法,並且給出了詳細的操作步驟和命令語句,相信看完此文會對具體配置有詳細的瞭解。
************************************************** ******************************
* Copyright(c) 2004-2006 Hangzhou Huawei-3Com Tech. Co., Ltd. *
* Without the owner''''s prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
************************************************** ******************************
Login authentication
Username:admin
Password:
dis int <-(預示端口狀況)
Ethernet1/0 current state :UP
Line protocol current state :UP
Description : Ethernet1/0 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet Address is <---(找到公網地址的端口)
IP Sending Frames'''' Format is PKTFMT_ETHNT_2, Hardware address is 000f-e24b-90c1
Media type is twisted pair, loopback not set, promiscuous mode not set
100Mb/s, Full-duplex, link type is autonegotiation
Output flow-control is disabled, input flow-control is disabled
Output queue : (Urgent queuing : Size/Length/Discards) 0/50/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last clearing of counters: Never
Last 300 seconds input rate 76409.96 bytes/sec, 611279 bits/sec, 221.16 packets/sec
Last 300 seconds output rate 169645.62 bytes/sec, 1357165 bits/sec, 217.84 packets/sec
Input: 84913558 packets, 1899317081 bytes, 84913558 buffers
1556505 broadcasts, 124223 multicasts, 0 pauses
374 errors, 0 runts, 0 giants
0 crc, 0 align errors, 374 overruns
0 dribbles, 0 drops, 0 no buffers
Output:73691649 packets, 1323897889 bytes, 73691649 buffers
19084 broadcasts, 0 multicasts, 0 pauses
0 errors, 0 underruns, 0 collisions
0 deferred, 0 lost carriers
sys <--(步入體系視圖)
[H3C]int e1/0
[H3C]nat server protocol tcp global www inside www
[H3C]nat server protocol tcp global 22 inside 22
[H3C]nat server protocol udp global snmp inside snmp
[H3C]nat server protocol udp global snmptrap inside snmptrap <--(一看就大白tcp/udp是以及談,www是80,snmp以及snmptrap是161.162端口)
[H3C]dis thellos
interface Ethernet1/0
ip address
firewall packet-filter 3000 inbound
nat outbound 3001 <--(這是客户上彀用的地址池不消管,其它的就是端口照射了)
nat server protocol tcp global www inside www
nat server protocol tcp global 22 inside 22
nat server protocol udp global snmp inside snmp
nat server protocol udp global snmptrap inside snmptrap
思科網絡的端口照射原理是同樣的號令紛歧樣罷了,這搭只給出配備佈置。
思科網絡>en
思科網絡#config t
思科網絡(config)Ip nat inside source static tcp 80 80
思科網絡(config)Ip nat inside source static tcp 22 22
思科網絡(config)Ip nat inside source static tcp 161 161
思科網絡(config)Ip nat inside source static tcp 162 162
-
H3C交換機配置文件備份方法
華為交換機有非常多的型號,那作為華為認證學習者,你瞭解華為交換機配置文件備份方法嗎?下面跟yjbys小編一起來看看吧!1、首先在一台計算機上運行TFTPServer軟件,這裏使用的是SolarWindsTFTPServer8.0,在設置中配置好Root目錄;在安全中配置好文件的傳送方向(接收、...
-
H3C環路測試教程
H3C的S9500系列高端交換機獲得了107項Tolly認證,是TollyGroup為一類交換機頒發認證最多的一次。下面YJBYS小編為大家整理了關於H3C環路測試教程,希望對你有所幫助。交換機以太網端口迴環測試功能包括內部環回測試和外部環回測試:內部環回測試:在交換機芯片端口自檢...
-
H3C大規模網絡路由技術模擬試題及答案
1、某局域網運行了2年時間(17,520小時),因設備故障而停用了8個小時。後來網絡擴建,加入新的設備後,又運行了1年時間(8,760小時),因軟件故障又停用了3個小時。則關於此網絡的可用性(Availability),下列哪些説法是正確的?(A)網絡擴建後的可用性比擴建前要好(B)網絡擴...
-
如何獲得H3CSE-Data Center認證
H3CSE-DataCenter(H3CCertifiedSeniorEngineerforDataCenterNetwork,H3C認證數據中心網絡高級工程師)證書可以證明其持有者掌握了包括機房基礎設施建設、路由、交換、安全等部署數據中心網絡所需的全方位的理論知識和操作技能,可以勝任大中型數據中心網絡的架構...