思科認證網絡工程師CCNA無線認證考試要點
CCNA無線認證旨在認可工程師在支持無線局域網方面的重要作用,包括網絡工程師/管理員、無線支持專家和無線局域網項目經理。
考試説明
200-355 WIFUND 實施思科無線網絡基礎考試時間為90分鐘,涵蓋與CCNA無線認證相關的60-70道考題。200-355 WIFUND考試檢驗考生Radio Frequency(PF)及802.11等知識點,同時檢測考生是否具備安裝,配置,監控及基礎故障排除小型企業的'無線網絡的能力。
考試要點
1.0 RF Fundamentals13%
1.1 Describe the propagation of radio waves
1.1.a Frequency, amplitude, phase, wavelength (characteristics)
1.1.b Absorption, reflection, diffraction, scattering, refraction, fading, free space path loss, multipath
1.2 Interpret RF signal measurements
1.2.a Signal strength (RSSI, Transmit power, receive sensitivity)
1.2.b Differentiate interference vs. noise
1.2.c Device capabilities (smartphones, laptops, tablets)
1.2.d Define SNR
1.3 Explain the principles of RF mathematics
1.3.a Compute dBm, mW, Law of 3s and 10s,
1.4 Describe Wi-Fi antenna characteristics
1.4.a Ability to read a radiation pattern chart
1.4.b Antenna types and uses
1.4.c dBi, dBd, EIRP
2.0 802.11 Technology Fundamentals13%
2.1 Describe basic Wi-Fi governance
2.1.a Describe regional regulatory bodies (such as, FCC / ETSI/ NTT)
2.1.b IEEE 802.11
2.1.c Wi-Fi Alliance
2.2 Describe usable channel and power combination
2.2.a Regional EIRP limitation examples
2.2.b ISM, UNII frequency bands
2.2.c Describe RRM fundamental(s)
2.3 Describe 802.11 fundamentals
2.3.a Modulation techniques
2.3.b Channel width
2.3.c MIMO / MU-MIMO
2.3.c (i) MRC
2.3.c (ii) Beam forming
2.3.c (iii) Spatial streams
2.3.d Wireless topologies
2.3.d (i) IBSS
2.3.d (ii) BSS
2.3.d (iii) ESS
2.3.e Frame types
2.3.e (i) Management
2.3.e (ii) Control
2.3.e (iii) Data
3.0 Implementing a Wireless Network16%
3.1 Describe the various Cisco wireless architectures
3.1.a Cloud
3.1.b Autonomous
3.1.c Split MAC
3.1.c (i) FlexConnect
3.1.c (ii) Centralized
3.1.c (iii) Converged
3.2 Describe physical infrastructure connections
3.2.a Wired infrastructures (AP, WLC, access/trunk ports, LAG)
3.3 Describe AP and WLC management access connections
3.3.a Management connections (Telnet, SSH, HTTP, HTTPS, console)
3.3.b IP addressing: IPv4 / IPv6
3.3.c Management via wireless
4.0 Operating a Wireless Network20%
4.1 Execute initial setup procedures Cisco wireless infrastructures
4.1.a Cloud
4.1.b Converged
4.1.c Centralized
4.1.d Autonomous
4.2 Describe the Cisco implementation of the CAPWAP discovery and join process
4.2.a DHCP
4.2.b DNS
4.2.c Master-controller
4.2.d Primary-secondary-tertiary
4.3 Distinguish different lightweight AP modes
4.4 Describe and configure the components of a wireless LAN access for client connectivity using GUI only
4.5 Identify wireless network and client management and configuration platform options
4.5.a Controller GUI and CLI
4.5.b Prime infrastructure
4.5.c Dashboard
4.5.d ISE
4.6 Maintain wireless network
4.6.a Perform controller configuration backups
4.6.b Perform code updates on controller, APs, and converged access switches
4.6.b (i) AireOS: boot loader (FUS), image
4.6.b (ii) IOS-XE: bundle, unbundle
4.6.b (iii) Autonomous
5.0 Configuration of Client Connectivity16%
5.1 Identify authentication mechanisms
5.1.a LDAP, RADIUS, local authentication, WebAuth, 802.1X,PSK
5.2 Configuring WLAN authentication mechanisms on the controller
5.2.a WebAuth, 802.1X, PSK
5.2.b TKIP deprecation
5.3 Configure client connectivity in different operating systems
5.3.a Android, MacOS, iOS, Windows
5.4 Describe roaming
5.4.a Layer 2 and Layer 3
5.4.b Intracontroller and intercontroller
5.4.c Centralized mobility
5.4.d Converged mobility
5.5 Describe wireless guest networking
5.5.a Anchor controller
5.5.b Foreign controller
6.0 Performing Client Connectivity Troubleshooting13%
6.1 Validating WLAN configuration settings at the infrastructure side
6.1.a Security settings
6.1.b SSID settings
6.2 Validating AP infrastructure settings
6.2.a Port level configuration
6.2.b Power source
6.2.c AP and antenna orientation and position
6.3 Validate client settings
6.3.a SSID
6.3.b Security
6.3.c Device driver version
6.4 Employ appropriate controller tools to assist troubleshooting
6.4.a GUI logs
6.4.b CLI show commands
6.4.c Monitor pages
6.4.c (i) CleanAir (controller GUI)
6.2 Identify appropriate third-party tools to assist troubleshooting
6.2.a OS-based Client utilities
6.2.b Wi-Fi scanners
6.2.c RF mapping tool
7.0 Site Survey Process9%
7.1 Describe site survey methodologies and their purpose
7.1.a Offsite (predictive / plan)
7.1.b Onsite
7.1.b (i) Predeployment (AP on a stick)
7.1.b (ii) Post deployment (validation)
7.2 Describe passive and active site surveys
7.3 Identify proper application of site survey tools
7.3.a Spectrum analyzer
7.3.b Site surveying software
7.4 Describe the requirements of client real-time and non-real-time applications
-
思科認證詳解和思科未來
思科認證相信很多從事計算機工作的人員以及在校的計算機專業大學生都非常熟悉,而對於很多想要從事網絡工程工作的人來説思科認證也許是很好但是也是比較貴的選擇,究竟思科認證如何,大家一起來看一下吧。【詳解思科認證】簡介思科認證是由網絡領域著名的廠商&mdash...
-
思科認證SIMOS考試要點
實施思科安全移動解決方案(SIMOS)主要檢驗考生作為網絡安全工程師對各種在思科ASA防火牆及思科IOS軟件平台上可用的虛擬專用網絡(VPN)解決方案。該考試主要考察考生是否具備通過VPN技術實施安全遠程通信的知識,包括遠程接入SSLVPN及點到點VPN(DMVPN,FlexVPN)。考...
-
cisco思科交換機配置篇
要進行思科交換機的配置,首先就得進入交換機的全局配置模式,在成功連接交換機並且登陸成功進入特權模式下,下面跟yjbys小編一起來學習一下思科交換機的配置命令吧!1、輸入進入全局配置模式:switch#configureterminalEnterconfigurationcommands,oneperline.Endwith...
-
關於思科認證資料
思科認證是由網絡領域著名的廠商Cisco公司推出的,是互聯網領域的國際權威認證。下面是小編整理的關於思科認證資料,希望大家認真閲讀!思科認證資料:通過CCIE的故事——光芒後的汗水於梅貞是思科的員工,她從一名普通的前台成長為懷揣CCIE思科認證的思科網...