雅思流程圖作文模板

雅思流程圖作文不需要表達自己的觀點，但是段落銜接一定要順暢。下面是小編分享的流程圖作文模板，希望能幫到大家!

　　流程圖作文模板

The figure illustrates the process used by the Australian Bureau of Meteorology to forecast the weather. 【第一段改寫，要用一般現在時。流程圖必備三個詞：process：整個過程, stage：階段，step：步驟】

There are four stages in the process, beginning with the collection of information about the weather. This information is then analysed, prepared for presentation, and finally broadcast to the public.【第二段總括四個階段，運用多樣的句式，顯示語言功底， 不呆板。注意beginning with，then，finally等表示順序的連接詞。】

Looking at the first and second stages of the process, there are three ways of collecting weather data and three ways of analysing it. Firstly, incoming information can be received by satellite and presented for analysis as a satellite photo. The same data can also be passed to a radar station and presented on a radar. Finally, drifting buoys also receive data which can be shown on a synoptic chart. 【大量使用被動語態，顯示客觀性。注意使用same，also等詞不漏痕跡的過渡。使用定語從句將兩個句子鏈接起來】

At the third stage of the process, the weather broadcast is prepared on computers. Finally, it is delivered to the public on television, on the radio, or as a recorded telephone announcement.【第二段已經是總括段，不需要寫總結。】

　　常用句型：

The following diagraph shows the structure of……

The picture illustrates……

It mainly consists of…….

It works as follows……

It always involves following steps…….

The whole procedure can be divided in………es.

　　銜接手段

高分作文與低分作文最明顯的一個差別就是低分作文很少使用連接手段對主題段內句與句進行連接。因此，大量而準確的使用連接手段，是提高分數最快的途徑之一。就流程圖而言，所謂的連接手段則是要在主體段內標明步驟。表明流程圖步驟的連接詞和連接短語現總結如下：

第一，第一步：Firstly, to begin with, in the first step, in the first place

第二，第二步：Secondly, next, at the second step, after that

第三，下一步：Thirdly, at the next stage, then

第四，最後一步：Fourthly, at the final step, lastly, finally

以上幾種連接手段用於步驟與步驟之間的銜接和過渡，在流程圖中使用，可以幫助考生提高段落內部的連貫性，使文章的.層次感更加分明。

範文：

這兩個流程圖展示了不同氣候下的房屋設計方案。

These two diagrams show the design of house from different weather: cool and warm respectively

如圖所示，在天氣寒冷的時候，應該選擇角度比較高屋頂以吸收更多的陽光來增加室內温度。與此同時，在房間的內層安置保温材料，用來存貯收集來的熱量。並且要在房屋的外側安裝insulation，來減少熱量的散失。這樣就可以保證儘可能高的室內温度。

As can be seen in the first graph linked to cool climate, roof with a high angle should be adopted to increase the indoor temperature by absorbing more sunshine. Meanwhile, a building material that can store heat is also needed within the house, coupled with the outside insulation, a material that can reduce heat loss. In this way, we can keep as much heat as possible inside the house in cold weather.

而在天氣比較熱的時候，白天和夜間的處理方式有所不同。屋頂應該採用反射性比較強的材料來避免吸收更多的熱量同時屋檐需要延長一部分，獲取跟多的陰影部分以確保室內温度降低。外層保温材料仍然需要安裝，減少冷空氣的流失。在白天注意關閉好窗户並將其遮蓋起來，避免更多的陽光進入室內。這樣就可以盡最大的可能避免熱量進入並且保存冷空氣在室內。而到了晚上只需要將窗户打開，讓室內空氣移出並且容室外的冷空氣流入房間，降低室內温度。

In contrast, when it is hot, the designing method is divided into two modes: day and night respectively. In order to lessen more heat intake, a reflective material should be adopted to build the roof, which is overhung for more shade. The insulation is also required to reduce the loss of cold air. What is worth mentioning in the day is that windows must be kept closed and covered, to avoid warm sunshine, while at night the windows should remain open, releasing the stored heat during the daytime and exchanging for more cool air.

總之，不同的氣候條件下的房屋設計方案也都會有所不同。

Overall, housing design should differ in cool climates and warm climates.